M1 V5 Rapid Disassembly
$109.99
An excellent upgrade from the previous version, featuring Tool-free Rapid Assembly and Disassembly for effortless customization.
Additional highlights include:
- 8000mAh battery for long-lasting, stable performance;
- Multi-mode connectivity, supporting up to 5 devices simultaneously;
- Separate Encoder for Enhanced Stability;
- Contour Line Themed keycaps;
- Side-printed Backlit Characters for better RGB effects;
- MonsGeek Driver for easy key remapping and RGB customization.
Disclaimer: This model supports customization via MonsGeek Driver only. QMK/VIA is not supported.
M1 V5 Multi-mode
Rapid Assembly and Disassembly
Quick Release
Hot-Swappable
MonsGeek Driver
8000mAh
Aluminum Case
Multi-mode
RGB Backlit
N-Key Rollover
Ball-Catch Screwless Fastening
Tool-free Rapid Assembly and Disassembly
Enjoy customization with ease—designed for both beginners and experienced users, featuring quick, tool-free, screwless assembly between the aluminum top and bottom case
Knob Pulled Out
Lift then Press
Mod Now
Flexibility Meets Customization in Keyboards
Hassle-Free
5-Pin Hot-swappable
M1 V5 is equipped with premium 5-pin hot-swap sockets, enabling users to easily assemble and swap between 5-pin and 3-pin switches.
South-facing PCBa
The south-facing PCB avoids causing interference with Cherry profile keycaps during customization, offering more compatibility and flexibility.
RGB Backlight
M1 V5 provides around 16 preset backlighting effects and customization through MonsGeek Driver, with brightness and speed control.
Gasket-mounted
The M1 V5 Series features a gasket-mounted structure, delivering a comfortable, soft, and cushioned typing experience right out of the box.
Lubed Stabilizers
M1 V5 Series comes with pre-installed pre-lubed plate-mounted stabilizers for easier assembly, perfect for keyboard beginners.
8000mAh Built-in Battery
Unlike other M Series models, the M1 V5 Series features an upgraded 8000mAh built-in battery, allowing for extended uninterrupted typing, gaming, or productivity without constant recharging.
M1 V5 Multi-Mode
2.4Ghz Wireless
M1 V5 is equipped with a receiver that allows users to utilize the 2.4GHz wireless mode, providing low latency suitable for gaming and typing purposes.
BT 5.0
M1 V5 makes it easy to connect up to 3 devices with a simple Fn+E/R/T combination, enabling seamless switching between tablets, computers, and phones.
USB-C Wired
M1 V5 offers a choice for users who prefer a USB-C wired keyboard, ensuring consistent and rapid response times for FPS gaming and minimal input lag.
A Full-fledged Upgrade
M1 V5 75% Aluminum Series features a full-fledged upgrade to the noise reduction system, and provides greater flexibility for experimenting with different sound profiles than before.
Plate Foam & Swith Pad
Poron Plate foam and IXPE switch pads reduce noise, providing a cleaner and more comfortable sound experience when typing
Case Foam
3.0mm thick top white Poron case foam with socket cut-outs, combined with a PET layer for enhanced sound isolation and noise reduction
PET Film
A switch pad/film features premade cross perforations for keeping a good seal for the best possible effect on the sound of the keyboard
Fully Upgraded Knob
This adjustment is based on user experience and feedback. M1 V5 Series features a new encoder and a levitating structure to avoid scratches against the case, as reported in the previous version.
Simplicity
By removing the side accent, the consistent support from MonsGeek fans allows us to balance costs further and focus on delivering an enthusiast-level keyboard at a reasonable price.
Anti-Ghosting Keys
With N-key rollover (NKRO) feature, M1 V5 supports simultaneous key presses without conflicts, which is particularly important in optimizing gaming experiences.
Mac and Windows System Switch
– Top: Mac Wireless Mode (built-in power supply on)
– Middle: Default Windows Wired Mode (built-in power supply off)
– Bottom: Windows Wireless Mode (built-in power supply on)
Note: The switch is located under the CAPS key
Separate Encoder
The V5 features an upgraded PCB with a separate encoder on a dedicated circuit board, enhancing stability, durability, and performance. The encoder PCB is securely installed into the bottom case with screws.
Need More Foam?
MonsGeek M1 V5 Domestic Version comes with a comprehensive upgrade to the noise reduction system, offering greater flexibility for experimenting with a variety of sound profiles.
*Disclaimer: The M1 V5 Domestic Version does not support screw-in stabilizers. Structure shown is for reference only.
| Model | M1 V5 Rapid Disassembly (Non-VIA) |
| Mount | Gasket |
| Case Material | Aluminum |
| Layout | ANSI |
| Connection | USB-C Wired & 2.4G Wireless & Bluetooth |
| LED | RGB |
| Hotswap | Y (5-pin) |
| PCB Thickness | 1.2mm |
| Stabilizers | Pre-assembled Plated-mounted Stabilizers |
| Screw-in Stabilizers | Not Supported |
| Battery | 8000mAh |
| Plate | PC |
| Plate Foam | Y |
| Switch Pad | Y |
| Tape Mod | N |
| Case Foam | Y |
| VIA | N |
| MonsGeek Driver | Y |
Reviews
There are no reviews yet.