Frequently Asked Questions
Category
How to Professionally Disassemble the MonsGeek MG108W Kit?
Disassembling the MonsGeek MG108W kit is a delicate procedure that requires care and attention to detail. Please keep in mind that any damage resulting from improper disassembly is not covered by the warranty. For warranty details, you can refer to our warranty policy.
It’s important to note that opening the top cover of the MG108W keyboard is not recommended unless you have the necessary specialized tools. If you decide to proceed with disassembly, follow these steps carefully:
![](https://en.akkogear.com/wp-content/uploads/2023/07/%E5%BE%AE%E4%BF%A1%E6%88%AA%E5%9B%BE_20230720181753-300x80.png)
1 First you need to pry off the top and bottom covers, you will need a pry bar. Removing the keycaps will be a better operation. There are a number of small openings in the seams of the top and bottom covers on the front (two on each side and six underneath), insert the pry bar into them and lift up to separate the clips. You’ll hear a snapping sound. The top snap will be easier to separate with a pry bar inserted into the seam from the back panel.
![73995497c19017cbf7f796c93f521d68.png](https://d33v4339jhl8k0.cloudfront.net/inline/132241/8e041be9d7202431d4b756fa68fce52bde0ce1c8/1a34b6091d449c37d8e598956bbd8a50b91729f4/73995497c19017cbf7f796c93f521d68.png)
2 Locate and remove the three screws securing the plate. Carefully separate the plate from the bottom case.
![94a6d9080ddb7ce4bb028c293392da72.png](https://d33v4339jhl8k0.cloudfront.net/inline/132241/e3aafb49c2fe5dce24de20fbec0194c664894b50/f45874a8c171919e4b9afb6bffb23c1565137c94/94a6d9080ddb7ce4bb028c293392da72.png)